SAME SAME
SAME SAME
SLANTING PIPES
PRUIFIED WATER TREATMENT PIPES
CIRCULATION AND FILTER EQUIPMENTINCLINED TUBE SETTLER

INCLINED TUBE SETTLER

INCLINED TUBE SETTLER

SLANTING PIPES sample

INCLINED TUBE SETTLER

INDUSTRIAL SEWAGE TREATMENT
INCLINED TUBE SETTLER SPECIFICATIONS:
standards→
Model↓
Diameter
of Pipes
A
B
I
W
H
L
Pipes
sets
Thickness
of boards
Materials
HCA-52
50
50
50
600
500
520
2500
10
0.6 / 0.8 / 1.0
ABS
HCA-75
50
50
50
860
500
750
2500
10
0.8 / 1.0
ABS

INDUSTRIAL SEWAGE TREATMENT

INCLINED TUBE SETTLER
SLANTINGPIPES
INCLINED TUBE SETTLER
Thebottomofpond
傾斜管
傾斜管可加速沈澱 As shown in Figure A, in sedimentation basin with a depth of H, the particles on water surface require a distance of H to deposit, while in the right-hand sedimentation basin (Figure B) with the same depth and several compartments, takes only a distance of h to shorten the sedimentation duration to up to h/H times. In other words, if the portions separated by the oblique lines are regarded as individual sedimentation basins, total depositing area is increased due to H/h times’ increase of sedimentation basins, thus enhance its depositing capability to up to H/h times. Slanting pipe with an H/h of ± 5 works exactly the same way as a continuous sedimentation basin.

INDUSTRIAL SEWAGE TREATMENT

Rectification
The ramification of water channel creates laminar flow within the pipe, thus results in a near-perfect sediment effect. Flow status is usually expressed in Reynolds number, with a value less than 2,000, indicating laminar flow. Generally, slanting pipe has a very low Reynolds number of 30~100.

INDUSTRIAL SEWAGE TREATMENT

SLANTING PIPESFEATURES:
SLANTINGPIPES pic1
For the slanting pipes the standing pipes of the single housing should be put in the precipitation pond to achieve its function.
The housing of the slanting pipes is aimed to connect the slanting pipe at an angle of 60 degrees and from a reversed slanting arrangement of crisscross structure with the adjoining pipes .
The shape of the housing becomes the standard of rectangle
with a diameter of 50 mm.

1.The "rectification" and "dual concrete effect" can truly catch the emulsion not easily precipitated .
The quality of water can be said to be excellent in a variety of precipitating facilities subject to the treatment in
the slanting pipes . The consumption of concrete agent can be saved.
SLANTINGPIPES pic2

2. Although ABS structure at the thickness of 1mm is used. It should be strong and can bear a weight of over 500kg
because of being a complex frame.

SLANTINGPIPES pic2

3. The installation is easy. Just put it on the frame at the time of installation.

SLANTINGPIPES pic3

4.There is only one layer of the slanting pipes. Structurally. There is no bending. So that it is very convenient. 。

5. There is no barrier such as girdle different from the slanting board so that it is easy to look at the quality of water from the surface of the precipitate pond. The appearance is good.

6. There is no barrier at the bottom of the pond so that you can freely choose direction for collection the mud,
collecting mud machines, water mud excavating machines, and conveyance belts for installation.
The space below the housing of the slanting pipes is wide and large so hat it is easy to check and maintain it.

SLANTINGPIPES pic4

7. Precipitation is conducted within slanting pipes so that it is no subject to the external factors such as dense current.
The slanting pipes are in the water so that there is no barrier.

8. Horizontal precipitation pond figures, rectangular precipitation ponds, and precipitation ponds of any shape can be installed.
SLANTINGPIPES pic5
 
PRUIFIED WATER TREATMENT

SAME
SAME SAME SAME
SAME SAME SAME SAME
SAME SAME SAME SAME SAME
SAME CO., LTD.
No.485, LANE 506, SEC.1, HIS NAN RD.,TONG YANG VILLAGE,WU JIH HSIANG,TAICHUNG HSIEN,TAIWAN
TEL:04-23352827 ‧FAX:04-23352659
E-Mail:same66@ms16.hinet.net

 
Copyright © 2007 SAME CO., LTD.. All rights reserved.